Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 1547" data-attributes="member: 82">Remove the seat? BAH, it lies.First, move the 743B to a level area.Lift the cab by removing the 2 bolts at the front of the ROPS then lift it up and lock in place.On the top of the chain case where the park brake is located is where you want to access. Remove the bolts holding this cover in place and lift it out. Be carefull not to damage the gasket. Drain out the oil (a horrible job) all 30 odd litres of it, mop out all you can with clean rags. Remove the plug on the front of the chain case, fill the chain case untill oil just starts to pour out of this hole, put the plug back in, and replace the chain case cover/park brake.Replacing the cover can be a bit of a pain, as you need to line up the brake discs and the slots on the brake unit.Any problems, just give us a yell, i am pretty sure this unit will be very close to my 743's.</blockquote>