seat pressue switch 5575

[sam un ont]

i have been having a time with a code 3 and the pedals locking up. the dash does light up when i sit,then go out leaving the park and seat belt which go out when the beltis fastened. i assumed that since the eic lit up that the pressure switches were ok but after mulling it over i realized that i have 2 seat switches and only one appeared to work. i assumed that there purpose was to compensate for operator movement as opposed to a separate function for each. if anyone knows please let me know sam

 

[skidsteer.ca]

Yes one of the two need to make continuity at all times while the machine is operating. Quite comon for these and the seat belt switch to fail.
Skidsteer.ca

 

[rick7775]

I have a 7775 and it has 2 seat switches and only 1 needs to be pressed, they put 2 in the older machines in case the operator sits on the front edge for better view. My seat switch is in the center and I had to replace it because of increasing failure and now everything's fine. That switch is crucial to the operation so replace it.