Reply to thread

Message: <blockquote data-quote="Axel" data-source="post: 81948" data-attributes="member: 11648"><p>Tazza, you say that the magent should have a pin or groove that acts as a locator. yes it does have a groove, however the pin which is missing is supposed to be on the sensor according to the service manual. what I don't understand is why would the pin remain after the magnet and sensor are aligned? Also, where would the locking tabs for the magnet be? there seem to be some worn tabs at the end of the metal bushing inside the magnet, but where it mounts to the cab there is an oval hole unlike what the photo in the manual which has a round hole with two square tab sides. I have a hard time imagining that the tabs could have created such a clean oval hole in the cab..but maybe. still haven't managed to get the magnet off the bushing(not much space for tools between the cab and seat bar)... thanks for all of the responses everyone, i'm on a steep learning curve with this machine</p></blockquote><p></p>