Reply to thread

Message: <blockquote data-quote="Flip57" data-source="post: 81783" data-attributes="member: 6939"><p>There is an allignment pin on the magnet that is easily twisted off when removing the bolt to the seat. I had the Dealer in Flagstaff replace my seat but they twisted off the pin. They then aligned the magnet just enough to get it out the door. My machine ran for about 10 minutes befor the magnet became out of alignment. I took a pan head machind screw and ground it down to fit the spot the pin should have been. It's stll there and working fine.</p></blockquote><p></p>