Reply to thread

Message: <blockquote data-quote="Bertdownton " data-source="post: 97535" data-attributes="member: 11550"><p>Good morning, we have an S250 that will not reverse in 2 speed mode when the right lever is pulled back, when the left lever is pulled back it reverses fine, items looked at are: adjusted all linkages to bobcat spec using service sheet from manual, repaired hydraulic leak, changed hydraulic filter and topped up oil. If you rev up the engine and pull right lever back then it starts to move and Boggs out, seems like something is bypassing not allowing oil to the hydraulic motor, any help would be appreciated, brake works good and no codes on panel.</p></blockquote><p></p>