Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 54920" data-attributes="member: 782"><p>trying to relate the problem to having just done spool seals ----------- if you have foot pedals then you must have had to unplug the brake solinoid to be able to get  the cross over linkage bar out the way to get at the spool seals  , did one of the three wires in the plug push partially out the plug when reconnecting it , maybe the wire from the plug is rubbing on the cross over bar and shorting out  , maybe pulling on the plug or hitting the solinoid during the spool seal  change out did it , maybe there is a crack in the plastic top of the solinoid and when you pressure washed some water got in to it -----------or maybe and most probally it can be chaulked up to  " It's just  one thing after another "</p></blockquote><p></p>