Reply to thread

Message: <blockquote data-quote="mdlktm70" data-source="post: 86907" data-attributes="member: 12388"><p>i have a 06 s185 2200 hrs that i have taken out of service for safety issues. It was used last on a job driving along with a load then started violently going into a spin and could not shut off or stop spin. Luckily the machine shut itself off after several spins and no one was hurt. Towed it back to shop and put it on blocks. Now it starts and dies right out as if its being choked out by the hydraulic pressure of all controls being applied at once. No codes on machine and it is the joystick model. Anyone have any similar issues before i dig too far into it. Thanks</p></blockquote><p></p>