Reply to thread

Message: <blockquote data-quote="Kermode" data-source="post: 36464" data-attributes="member: 3305"><p>The female couplers are easy. All you need is a 9/16 allen wrench and a pair of slip joint pliers or the equivalent. Insert the allen wrench in the open end and grip the coupler gently just behind the sliding collar. The back part of the coupler should unscrew. Inside you will find two collets on a stem backed by a spring running through the centre. Gently pry the collets off the stem. If you aren't careful they will fly all over the place. Ask me how I know. You should then have access to all the o-rings and backing rings in the coupler. The male coupler is similar although I haven't figured out how to get off the collar that holds it in the block apart.</p></blockquote><p></p>