Gorillarms
New member
- Joined
- Jul 17, 2014
- Messages
- 1
I have not overheated it since when the gauge jumps up I shut it down. Have replaced thermostat, water pump, cleaned out rad and oil cooler fins. So I have observed the fan which is hydraulic driven seems to work however once it was not on at all. Is it not a continuous run ? Is it two speed ? Perhaps filter is in need of a replacement ? Is the fan splined ? Lastly there are four bolts that hold it to assy, when these are removed do I have clearance to drop hyd mtr assy out of housing and clear steering rods. of questions here thanks for the help in advance !