s 185 Auxiliary Hydrolics Problem

[trooper]

When i push the auxiliary hydraulics button it doesnt turn the light on and shuts down the engine. Could any one please help me

 

[Tazza]

Do you get any error codes on the display?

 

[trooper]

Do you get any error codes on the display?

No there are no codes on the unit

 

[Tazza]

No there are no codes on the unit

Seems odd, a short or open circuit on the coils should flash an error code, can you try lifting the cab and disconnecting the coils? just un-plug the two connectors. Sorry, i don't have a picture of where they are....
See if they flash an error

 

[trooper]

Seems odd, a short or open circuit on the coils should flash an error code, can you try lifting the cab and disconnecting the coils? just un-plug the two connectors. Sorry, i don't have a picture of where they are....
See if they flash an error

ok thanks i will give it a try

 

[Dogsluvtrux]

ok thanks i will give it a try

Maybe pressing the wrong button? The button furthest to the right on a g-series machine is the Aux. Pressure Release button...if you press and hold it the machine releases hyd. pressure and dies...

 

[Tazza]

Maybe pressing the wrong button? The button furthest to the right on a g-series machine is the Aux. Pressure Release button...if you press and hold it the machine releases hyd. pressure and dies...

I too thought this.... I was wondering if its possible the switch was sticking causing it to turn on and stay and then shut down.