Reply to thread

Message: <blockquote data-quote="PEVO" data-source="post: 115075" data-attributes="member: 17894"><p>i guess 3 is the charm. i ordered 5/8SAE flat face from amazon...since realizing the threads were not tapered pipe treads and 1/2 was too small, 3/4 too big. Anyway i took the old AG fitting to the local hydraulic shop to have them decide what i had...and ill be damned...they are 5/8 SAE. threads with o ring ate the base. Finally i guessed right.</p></blockquote><p></p>