Reply to thread

Message: <blockquote data-quote="fishhunter2" data-source="post: 65956" data-attributes="member: 9186"><p>Just re-sealed the whole hyd. control valve on my 763c ... The spring and ball were as easy as anything you have ever done..Here is how to do it in 30 seconds... Put the spool valve back into place...place the spring into its hole , place ball into its hole , and hold with a finger or thumb keeping pressure on the first ball and the end of the spring. Then place the other ball into place , keeping pressure on the first ball , and now the second ball. Here's how to get them back in without a worry... Take a pair of channel lock pliers...lightly slide the jaws of the pliers over the balls holding them GENTLY in their place. With the side of the pliers against the control valve housing when you clamp the balls together LIGHTLY...begin to push the spool valve cover over the spool valve into place , while releasing a LITTLE pressure on the pliers... It should slide over the balls and spring like butter.....</p></blockquote><p></p>