Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 65950" data-attributes="member: 782"><p>there were many different seals over the years , some interchangable , some not , the black ones were old school , after black then came some orange ones which were thin and you needed a tool to install them over the spool and not damage them , then cream colored , purple and green , since your is mixed up I'd tell you to give  dealer your serial number and see what they recomend ----------there is a pair of pliers to put the spring and balls back in , you can do it with out the tool , this is how I do and I have the pliers in my box but sledom use them , it is hard to explain but here goes , I put the collor in a vise grapping it by the shaft where the e clip goes , it needs to be out the cap to do this , put one bal and the spring into the hole , and cock the bottom ball into thecollar , put the top ball over the spring on top , use a screw driver sideways to push the ball down as you push the spool and it will go right in</p></blockquote><p></p>