Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 48325" data-attributes="member: 782"><p>The new style pin is just as you discribed , the threads are on the bottom end and you need longer bolts  , I think they did that because the pins use to break alot when the threads were in the end , when your gathering bolts get one about 3 inches longer to use to line up and pull the pin ito the boom's a-taper------------------the rubber ring goes on the end of the tube that the bushing sits in , it keeps dirt out , I would guess that your weldment is worn down and you won't have any lip for the rubber to ride on any way</p></blockquote><p></p>