Reply to thread

Message: <blockquote data-quote="usa#1" data-source="post: 60998" data-attributes="member: 3516"><p>I don't have a sketch, but take a look at Northern Tool item # 128008 for an idea of a possible style for the hub assembly. Would have to cut pipe section off the hub assy flush with flange and then weld on a circular plate with the correct bolt pattern matching the skid steer (or cut out center of an old wheel with correct bolt pattern). Then just get a used wheel/tire that matches bolt pattern of the Northern Tool hub and bolt it to the hub. You would need to make 4 of the adapters. Could be bolted on "out in the field" one tire at a time.</p></blockquote><p></p>