Reply to thread

Message: <blockquote data-quote="coreya3212" data-source="post: 26645" data-attributes="member: 2406"><p>Are we talking about a disc harrow?  My neighbour and I just rigged a 5 foot for the bobcat.  He has a 1840, I have a 825.  We actually just welded 4 u shaped slots on the top to pick it up with the BC forks from behind, so you are pushing itfrom behind as opposed to pulling it with a tractor 3 pt.  Using down pressure to set your cut depth.  Works like a damn.  It is pretty heavy though, so depending on the machine, you can get the ass end bouncing a bit, of course thats only while moving it around.  Just an idea.  Done the same with a tine cultivator and it works really well also.</p></blockquote><p></p>