Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
General Skidsteer & Technical Topics
Shop Talk
post hole digger
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="coreya3212" data-source="post: 32869" data-attributes="member: 2406"><p>I did this conversion about a year ago. I bought the 3 pt adapter for the skid steer and mounted a hyd motor on it. I had to fab a pto spline and weld it to a bushing with a key shaft, but I know you can buy them. the problem i had was the adaptor plate I bought has all three points on the same vertical plane which made things tougher to fabricate. My 3 pt auger was built to go on a tractor obviously, but you take out the normal top link and pin the arm directly to the tractor. So i pinned that arm to the adaptor plate and then had to build some arms to stand off the lower points. It was a bit of a pain but it does work for the add post hole I drill. I wouldnt expect to start a fencing company with it though. Good Luck.</p></blockquote><p></p>
[QUOTE="coreya3212, post: 32869, member: 2406"] I did this conversion about a year ago. I bought the 3 pt adapter for the skid steer and mounted a hyd motor on it. I had to fab a pto spline and weld it to a bushing with a key shaft, but I know you can buy them. the problem i had was the adaptor plate I bought has all three points on the same vertical plane which made things tougher to fabricate. My 3 pt auger was built to go on a tractor obviously, but you take out the normal top link and pin the arm directly to the tractor. So i pinned that arm to the adaptor plate and then had to build some arms to stand off the lower points. It was a bit of a pain but it does work for the add post hole I drill. I wouldnt expect to start a fencing company with it though. Good Luck. [/QUOTE]
Verification
Post reply
Forums
General Skidsteer & Technical Topics
Shop Talk
post hole digger
Top