Plow on 773

[skidloader19]

Hi everyone, I have a 2002 bobcat 773 g series turbo with high flow. I just got back my western plow that was made to put on the skid loader so now I have to get the lines made. Which ports on the bobcat will I use? the two lower ones? also should I put a resistor in the line so I dont blow apart a cylinder? Let me know what you guys think. Thanks!!!

 

[[email protected]]

you use the top and bottom connectors. the middle one is the case drain. restrictor is a good idea because the plow will move way too fast without one