Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
Bobcat Compact Track Loaders
Parts info on track drive motors
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="siduramaxde" data-source="post: 19443" data-attributes="member: 248"><p>If you have a Bobcat CTL with the old style track drive motor you can replace the outer bearing if you are concerned about a bad bearing ruining the drive motor. I had metal flakes in my hub oil so I decided to take the drive motor out and replace the bearing. Once I got the motor apart I found that the outer bearing race was damaged. I have found all the parts for under $400.00 US. The bearing and race part # is 32014 X/Q (SKF bearing) and the hub oil seal is part #25950 (SKF oil seal). I got both of these parts from my local NAPA for $110.00. I did have to get 2 face seals and 2 large O-ring seals from Bobcat and they cost $200 some dollars. If you have a press and a bearing puller you can do this at home. I took my motor out of the machine and then took it to a local hydraulic repair shop and they are doing the work for $150. So if you are worried about your drive motor you can have peace of mind for about $400 - $600. It sure beats $5000 for a new motor.</p></blockquote><p></p>
[QUOTE="siduramaxde, post: 19443, member: 248"] If you have a Bobcat CTL with the old style track drive motor you can replace the outer bearing if you are concerned about a bad bearing ruining the drive motor. I had metal flakes in my hub oil so I decided to take the drive motor out and replace the bearing. Once I got the motor apart I found that the outer bearing race was damaged. I have found all the parts for under $400.00 US. The bearing and race part # is 32014 X/Q (SKF bearing) and the hub oil seal is part #25950 (SKF oil seal). I got both of these parts from my local NAPA for $110.00. I did have to get 2 face seals and 2 large O-ring seals from Bobcat and they cost $200 some dollars. If you have a press and a bearing puller you can do this at home. I took my motor out of the machine and then took it to a local hydraulic repair shop and they are doing the work for $150. So if you are worried about your drive motor you can have peace of mind for about $400 - $600. It sure beats $5000 for a new motor. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
Bobcat Compact Track Loaders
Parts info on track drive motors
Top