Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 43556" data-attributes="member: 82">Some say yes, some say no.The problem that i was told about is the fact that the pumps are made to give X power, with a larger engine they can provide the same power but with the relief valves the oil will go over it when under greater load as the engine will not bog down like the lower powered one. This will create more heat and possible over heating of the pumps. If you just keep that in mind, you shouldn't have a problem. Others have replaced 32hp engines with 46hp ones in 743 machines without any issues.</blockquote>