Reply to thread

Message: <blockquote data-quote="mark18mwm" data-source="post: 90479" data-attributes="member: 9306"><p>Tazza is right about trailers popping off the ball and coming back if they are not latched. I dont know what your plans are for mounting a ball, but on mine I took a torch and burned a hole in the tip (about 6"-8 from the very end) of one of the forks and just stick a ball in it and hand tighten the nut on the ball stud so it comes off easy when I'm done. I had seen this done on fork lifts before I did it, works great and you don't need to buy or make anything.</p></blockquote><p></p>