On a BC 763 G what size thread is the Hyd Coup

[1awert1]

I need to know what size thread is used on the Aux. hydraulic line. This is a male, 3/4" .... almost looks like NPT but it's not....This is the stud you would see if you take off the flat face couplers on the front, (Aux. Hydraulic out).....thanks.

 

[skidsteer.ca]

#12 ORB
12/16” o ring boss, or 3/4”
The male will have a oring at the base end. Same thread as JIC, very common hydraulic thread.
Ken

 

[1awert1]

#12 ORB
12/16” o ring boss, or 3/4”
The male will have a oring at the base end. Same thread as JIC, very common hydraulic thread.
Ken

thanks, i'm having a heck of a time finding a adapter to fit that, been to two major farm/tractor/skid dealers, it shouldn't be that hard to find, at least now i can order it...

 

[Kermode]

thanks, i'm having a heck of a time finding a adapter to fit that, been to two major farm/tractor/skid dealers, it shouldn't be that hard to find, at least now i can order it...

That's surprising. ORB and JIC are common as Hell. What, exactly, are you trying to adapt to?