Old L555 need to release brakes

[Ster1]

Hi folks, Does anyone know how to release the brake on an old L555? I need to move it and the engine is dead. Thanks for your help!

 

[Stef]

Foot operated pedals, with brake set pedal between foot controls. The release pedal is just above and next to set pedal. I suspect you will find that the brakes are not engaged and the hydraulic drive system is preventing movement of the machine. (On a flat surface, you can get four of the 4wheel car dollies fro HF and put under the wheels to move it around.) -Stef

 

[Ivan]

I don't think your brakes are locked you have oil in your drive motors holding the wheels from moving

 

[Ster1]

Ok, So other than the pedals, there is no real brake, like there is on other machines. Like a Gehl, for instance, has a hydraulically operated pin that engages the driveline when pressure goes away (engine dies) as a safety measure to prevent rolling. You put a porta-power into it to release it. That really what I was wondering about. I have to to recover this machine out of a mud hole next week. Anyway thanks folks!