old ford skid steer

[torrence20]

i picked up a ford cl20 skid steer, i have a parts manual for it but its somewhat lacking, it doesnt give me a good description of a wireharness, the hour meter and ammeter have long since been unhooked, and there is a bus bar type power divider on the unit that has various wires coming and going from it but there isnt really anything electrical on the thing so if anyone may have or know where i can get a schematic of it if one exists short of tracing every wire down i would appreciate it, over all it runs ok and everything works, im going to make some diff linkage for the lift and tilt valve as they are backwards to what i am used to running. ie. the right control would normally be the dump/curl and the left be the lift/lower boom arms. on this machine is the opposite and im terrible at running it this way, if anyone has ever messed with one feel free to chime in. even if its unrelated to what ive posted thanks