Reply to thread

Message: <blockquote data-quote="sterlclan" data-source="post: 1355" data-attributes="member: 45"><p>I recently pulled a motor on my 630 it is possible without splitting the chain pull the front sprocket off and the motor comes out putting it in is tough without pulling the axle out a little to line the sprocket with the axle but doing this makes the seal come out of the tube if you make shure to put the seal back in it isnt all that bad .....well as long as you can get it to the garage mine was 200 feet behind the shed in the dirt downhill good luck Jeff</p></blockquote><p></p>