No power to 60 xt instrument panel

Help Support SkidSteer Forum:

Coreydog2

New member
Joined
Jul 23, 2020
Messages
2
used case skidsteer for 4 hours, ran perfect whole time. three days later I go to use it and I have no power to instrument panel, no click, no beeps, no nothing. tried to jump and got nothing. sticker on battery said it was six years old so I replaced. still nothing. any ideas?
 
OP
OP
C

Coreydog2

New member
Joined
Jul 23, 2020
Messages
2
Remembered that a while ago a couple of times when i was putting out hay that as i was traveling the machine cut off momentarily as if the seat safety switch had activated. I got the loader arms raised and got the cab open. Jumped the seat safety switch circuit. Still nothing.
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,837
Remembered that a while ago a couple of times when i was putting out hay that as i was traveling the machine cut off momentarily as if the seat safety switch had activated. I got the loader arms raised and got the cab open. Jumped the seat safety switch circuit. Still nothing.
The best suggestion i have is to check all connections and fuses/holders. Corrosion can cause issues like this.
 
Top