Ok so in first few weeks i have carried out the following:- Full brush paint of external body and boom - new decals on order from USA awaiting delivery Rebuild of main bucket cylinder including seals and re-honing - freed pins and greased Changed engine oil and engine filter Changed air filter and repaired cover Cleaned hydraulic re-usable filter with petrol - the one next to neutralisers under the seat Freed up the safety pins that pop out to hold the boom in place when working on it and greased Greased all 4 wheel seals I have also topped up hydraulic oil I have checked the chain tension and seems to be very minimal movement when you hold one wheel and move the other I have on order an inline fuel filter and both Hydraulic filters As per my other post i cannot remove the boom pins and i do not appear to have the other canister type fuel filter on my engine so caannot do these tasks My question is - can anybody think of anything else maintenance wise i need to do
NHL455 Maintenance
- Thread starter NHL455
- Start date
