Reply to thread

Message: <blockquote data-quote="codynutts" data-source="post: 49956" data-attributes="member: 6494"><p>I just changed hydro oil on my nh l555 deluxe. I drained all fluid and replaced one wheel seal while it was drained. I also changed filters when doings this. Before this was all changed hrdrolics worked fine, (fluid was really milky white with alot of water in it. I changed all fluids and replaced with John deere Low viscosity hydrolic/trans oil. The prolem now is its is really SLOW and choppy. I have checked fluid and it is over full (so thats fine). I also took filter off tonight to see if it was plugged and was not. also cut filter apart to see if it was milky/plugged, was not. I drove it around for a good 20min tonight to get it warm and whille doing this i would move pedals. it would also bring the hydro charge light on when i got the boom about 2 feet up. Also sounds like its cavatating. all lines have been checked and are tight. Is there a bleeding procedure that this needs that i dont know about or whats your guys thoughts. thanks</p></blockquote><p></p>