Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Newbie idiot question. play in left stick 751F
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="skidsteer.ca" data-source="post: 5239" data-attributes="member: 307"><p>Its alot easier if you block it up, then it can't run away. The worst is if you get them both out and you can't get both sides to stop at the same time so the park pin can release.</p><p>The machine moans and groans against the park pin trying to shear it off (very tough, had one enguage while driving 5 mph and nothing broke) and stall the engine.</p><p>The park pin solinoid is in the center at the front under the rops, 3 heavy wires coming from it.</p><p>If you ever need to defeat it. Just remove the 2 small bolt (7/16" wrench) on each side and slide it up of the shaft that is in the center.</p><p>Then lift the shaft up about 1 1/2" and put a hose clamp around the shaft to hold it there. Now you park brake should be off.</p><p>This is good to know because some electrical problems will leave you with the brake stuck on. Now you will be able to get to the shop, trailer, finish your work or adjust a badly messed up steering.</p><p>Ken</p></blockquote><p></p>
[QUOTE="skidsteer.ca, post: 5239, member: 307"] Its alot easier if you block it up, then it can't run away. The worst is if you get them both out and you can't get both sides to stop at the same time so the park pin can release. The machine moans and groans against the park pin trying to shear it off (very tough, had one enguage while driving 5 mph and nothing broke) and stall the engine. The park pin solinoid is in the center at the front under the rops, 3 heavy wires coming from it. If you ever need to defeat it. Just remove the 2 small bolt (7/16” wrench) on each side and slide it up of the shaft that is in the center. Then lift the shaft up about 1 1/2” and put a hose clamp around the shaft to hold it there. Now you park brake should be off. This is good to know because some electrical problems will leave you with the brake stuck on. Now you will be able to get to the shop, trailer, finish your work or adjust a badly messed up steering. Ken [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Newbie idiot question. play in left stick 751F
Top