Visit our tractor and agricultural equipment communities:

Ingersoll Forum Case IH Forum Combine Forum Hay Forum

JCB Forum John Deere Forum Kubota Forum Mahindra Forum

Massey Ferguson Talk New Holland Forum Valtra Forum Yanmar Forum

Zetor Forum Farming Forum

Reply to thread

Help Support SkidSteer Forum:

Message: <blockquote data-quote="CMC76" data-source="post: 106519" data-attributes="member: 17321"><p>New machine for me, new forum. I generally join forums when i buy a truck or in this case equipment. I just picked up a 2011 C238 today that i will be using on some property i own. Mainly light grading, hauling logs with a grapple. general light construction. Ill give a quick rundown, and then to my few questions, hopefully no to longwinded. Machine is overall pretty clean, has been backed into a few things, so ill be doing some touch up. - One of the plastic pieces ( i would have never expected plastic ) that is above and to the left of the rear access door is cracked. is this a NH only replacement? -The interior is pretty loaded, heated seat, full hvac, radio. It needs a good cleaning, but i also need to learn a few things. - The radio is static on all channels, needs an antenna im guessing, but there is a plug port to the right of it, is this for an aux input? -when operating the hand throttle, the pedal throttle will need to be pulled up by foot to go back to idle. Is there a return spring, grease fitting? or likely just mud in there? - one of the light housings is cracked and needs to be replaced, finding it no problem. But is there an upgrade for better lighting? can i pull power for an LED lightbar from this lead as well? Im sure allot of this stuff will be in the manual, which i need to pick up. but any other help or advice is appreciated. thanks</p></blockquote><p></p>

Verification