Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
Bobcat Compact Track Loaders
new to loaders
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="siduramaxde" data-source="post: 51470" data-attributes="member: 248"><p>I think if you do a search on this site you will find all sorts of info. I have a T200 and a couple things I can tell you is to change the drive carrier oil often. Don't forget to change case drain filters. If case drain filters are plugged the drive carrier could fill with hydro oil which is not good. Replace your timing belt. A broken timing belt will result in bent push rods. The hydro filter is behind the cab and can be accessed by lifting the cab. To lift the cab just remove the 2 bolts on the front lower corners of the cab. The drain hose for the hydro system is located under the hydro tank. There is an access panel down by the track on the same side of the machine as the sight glass for hydro fluid. Once that is off there is a hose that you can pull out to drain the fluid.</p></blockquote><p></p>
[QUOTE="siduramaxde, post: 51470, member: 248"] I think if you do a search on this site you will find all sorts of info. I have a T200 and a couple things I can tell you is to change the drive carrier oil often. Don't forget to change case drain filters. If case drain filters are plugged the drive carrier could fill with hydro oil which is not good. Replace your timing belt. A broken timing belt will result in bent push rods. The hydro filter is behind the cab and can be accessed by lifting the cab. To lift the cab just remove the 2 bolts on the front lower corners of the cab. The drain hose for the hydro system is located under the hydro tank. There is an access panel down by the track on the same side of the machine as the sight glass for hydro fluid. Once that is off there is a hose that you can pull out to drain the fluid. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
Bobcat Compact Track Loaders
new to loaders
Top