Reply to thread

Message: <blockquote data-quote="jerry" data-source="post: 7840" data-attributes="member: 931"><p>The next time it won't start take #1 plug wire and put a spare plug in it and lay it on the manifold and watch for spark when cranking engine. If you have to do it alone turn ignition on and jump the starter soleniod or use a remote switch. You could check the fuel soleniod by disconnecting the line ahead of the fuel pump( on my 632 it is a rubber line here) and turning on ignition switch but if the engine is hot it would not be safe. Maybe crank it over with the choke on, if the plugs get wet you have fuel. If there is fuel and spark check compression next.</p></blockquote><p></p>