Reply to thread

Message: <blockquote data-quote="fordbroncodave" data-source="post: 91045" data-attributes="member: 13083"><p>Well here is an update, it has 4 gauges in it now. Everything is functioning. Service/run switch is bypassed. Really wasn't all that hard but took a long time. Autogage by autometer has a kit of 3 gauges with electric sending units and i got a fuel gauge separate. As for the rest of the sensors, if they ever ground, it will trip the wires going into the computer pins. To get all sensors to work i am just going to attach orange and red 3/4" clearance marker lights for a trailer and just label each one. Also i am getting a new seatbelt with the sensor inside. Probably out of a 97 f150. Just need the drivers latch and center bench seat buckle. Way better than $170+ Also to mention, part number on my old computer is new holland in my john deere machine. Probably compatible but unknown as i could not verify. Previous owner bought machine in same condition with the same bad display so not sure if it ever worked</p></blockquote><p></p>