New holland ls180 b

[jhamm]

I have an issue when I get in machine seat sensor works turn key on plug in seat belt start machine push the parking brake button to activate controls and the 5 amp fuse blows seat sensor seems to be working and seat belt seems to be ok the dash says volts then goes to 00.0 turn machine off and it will not restart until the fuse is replaced any suggestions ?

 

[Mike10]

The control valve solenoid valves are also on the circuit through the instrument panel. Remove the panel between your legs and unplug both solenoids, boom and bucket only, and see if the fuse still blows. If not, plug one solenoid back in and then the other one to determine which is bad.

 

[jhamm]

The control valve solenoid valves are also on the circuit through the instrument panel. Remove the panel between your legs and unplug both solenoids, boom and bucket only, and see if the fuse still blows. If not, plug one solenoid back in and then the other one to determine which is bad.

It was the bucket solenoid got it replaced it now works I did replace the 5 amp fuse with a 10 amp and was able to get it to hold so I could at lest move it to the barn but would not leave the 10 amp fuse in thanks for your reply