Reply to thread

Message: <blockquote data-quote="jhans" data-source="post: 74907" data-attributes="member: 10729"><p>Hello, First off, what a great site with great participants. I have learned so much about my machine from browsing here I have a Deere 575 which I believe is basically the same as the L455. It has the control module for the restraint system. Thanks to this site, I believe have figured out the proper seat switch and belt operation and sequencing but I am still having a problem with the unit starting. When I sit in the seat, the timer and seat light comes on, when I buckle the belt the belt light comes on and when I turn the key on, the sol light comes on but the unit will not turn over to start. I believe that the white wire comes from the switch to the control module and I do have power to that wire at the control module when I turn the key switch to start. I also believe that the white wire with the blue strip goes to the starter relay in the engine compartment. This white wire with the blue stripe does not get power when the key is in the start position even though the white wire does. This behavior is the same whether or not the toggle switch on the control module is set to run or service. It does not start in the service position. This is "normal" for this machine but every so often it works just fine. Please help me figure out why the starter relay is not getting consistent power. Thank you, Jhans</p></blockquote><p></p>