Reply to thread

Message: <blockquote data-quote="Mike10" data-source="post: 49925" data-attributes="member: 5461"><p>Need to know which style imstrument panel you have. Is it across the front or on the left pillar. They use different wiring diagrams. Do these checks first. If the instrument comes on when you first sit in the seat then your seat switch circuit is good. Next buckle the seat belt. If the seat belt ligjt goes out then the seat belt circuit is ok. If you have a cab door the door switch miust be closed and operating properly. Next disconnect one of the comtrol valve solenoids and check if the other pedal works. If not then reconnect that one and disconmect the other one and recheck. One must be connected for the system to work. Whst is the emergency service valve you used to raise the loader boom?</p></blockquote><p></p>