Reply to thread

Message: <blockquote data-quote="skidsteer.ca" data-source="post: 29846" data-attributes="member: 307">I  believe to use your high flow any flow from your standard flow pump is already being used. Your 30 gpm includes both pumps combined. So unless you have some additional hydraulic valves (say like rear stabilizers) that can divert flow from your standard pump to control the chute, you are down to a couple options. Electric winch to rotate the chute. Or electric over hydraulic valve mounted on the blower to split some of the flow off the main circuit as required to control the chute. Or a manual chute.Your looking for @ a 12.7 cubic inch motor volume to give you 540 rpm at 30 gpm flow.I looked through <a href="http://www.surpluscenter.com" target="_blank">www.surpluscenter.com</a> cat but seen nothing designed to run with that much flow at the rpm you want. You could try <a href="http://www.baileynet.com" target="_blank">www.baileynet.com</a> or <a href="http://www.loaderpartssource.com" target="_blank">www.loaderpartssource.com</a>Ken</blockquote>