Reply to thread

Message: <blockquote data-quote="reaperman" data-source="post: 105571" data-attributes="member: 6675"><p>Was everything working properly when you first took it out of the garage, lights to the display panel? Normally when a error is detected and the machine is about to shut down the computer will beep a few times letting you know its going to shut the machine off. Did it beep? Perhaps the fuel shutoff solenoid is one of your issues where the it will not keep the mechanism is the "hold" position. When you first start a machine there is a wire that puts the fuel shutoff in the "pull" position for a couple of seconds to allow fuel to the engine. Then a couple seconds later, another function puts the fuel shutoff in the "hold" position to allow fuel to the engine until the machine is turned off. You can manually override the shutoff by pulling and tying it to the open position allowing the free flow of fuel. The shutoff is staring you right in the face when you open the back door. Do a youtube search if your not familiar. This may not be the answer to all of your problems, but sometimes Murphy strikes with two different issues giving us a giant headache. This is a easy step to check off, but it would explain why your machine is suddenly shutting off after only a couple of seconds.</p></blockquote><p></p>