bobcat743b
Well-known member
- Joined
- Jun 15, 2019
- Messages
- 75
bought this 743b bobcat last fall. had a wheel seal leaking. fixed that, had a rear seal on the motor leaking, fixed that. hyd light was on so put in a new filter and it cleared that up. had wheels off up on jacks. when i started it the wheels would turn real slow. i started it probably twice a month just let it warm up. today i put the wheels back on. took the jacks out , starter it up and moved it out of the garage to see what it would do. after about 4 minutes the left side became jerky. after 10 minutes both sides were jerky. it sounds as maybe its air bond. i raised the bucket several times and it does have some air in it. hoping its just an air problem but is there something i can take loose to get every thing bled off. it seemed to work okay when i first pulled it into the barn. sometimes on the left side the control arm almost feels loose. all comments welcome, thanks for reading.