Reply to thread

Message: <blockquote data-quote="ABhynes" data-source="post: 40343" data-attributes="member: 4981"><p>I had the boom left raised on the machine overnight and the locking pin for the boom is inside behind the operator. The main wiring harness for the compurter was touching the boom pin spring. I must have loosen the plug for the computer when I pulled the pin back in and while I was operating must have come more loose. I took the plug out and re-install it and moved the wiring harness from the spring location and everything worked OK. Thanks Tazz, for writing back, back to snowclearing.</p></blockquote><p></p>