Reply to thread

Message: <blockquote data-quote="hollister" data-source="post: 14712" data-attributes="member: 1652"><p>Ron, I did finally see the photos you posted. Yes, plate A is what you remove to expose the castle nut and cotter pin. I removed the axle shafts on the left side, not the right side as you have shown in the photo. I don't remember if you can unbolt the filter that is in the way of this cover. If you can, it would give you more room to get a bottle jack in that area and press the shaft out. Hollister</p></blockquote><p></p>