Mustang 2100 Swashplate neutral problem

Skidsteer Forum - Bobcat, New Holland, Case, John Deere

Help Support Skidsteer:

Mixman1

New member
Joined
Dec 3, 2024
Messages
3
Mustang 2100RT. Error code 1. Right drive neutral drift fault. Service manual says swashate sensor or solenoid among a few other items. Sensor checks out at 5 volts power and 2.5 volts on the sender. Solenoids read 2,4 ohms. All within range according to manual. I tried swapping the wiring on the left and right sensors, and the fault code still indicated right side.
Any ideas? Anyone experience this before?
Only change I can think of that might be relevant is the weather has turned cold here. Slightly below freezing at night lately.
 
Mustang 2100RT. Error code 1. Right drive neutral drift fault. Service manual says swashate sensor or solenoid among a few other items. Sensor checks out at 5 volts power and 2.5 volts on the sender. Solenoids read 2,4 ohms. All within range according to manual. I tried swapping the wiring on the left and right sensors, and the fault code still indicated right side.
Any ideas? Anyone experience this before?
Only change I can think of that might be relevant is the weather has turned cold here. Slightly below freezing at night lately.
Im currently in the EXACT same situation. What was the remedy?
 

Latest posts

Back
Top