Reply to thread

Message: <blockquote data-quote="Soiled" data-source="post: 15439" data-attributes="member: 1708"><p>****UPDATE*****I called one of the mechanics I have been talking to and informed him of what was going on and he asked if I was sure the solenoid was bad and after telling him the story he asked if I had the plunger inserted in the solenoid when I checked it, which I didn't, it fell out when I pulled the part and I didn't realize it. After putting the plunger in it and rechecking it, it was operating properly, Soooo, I finally threw in the towel and called a flatbed to haul it off. While waiting for the wrecker I put the solenoid back in and was making room for the wrecker when I said screw it, and tried to start it one last time and wouldn't you know it, it stumbled over choked and ran for a second and stalled out. So naturally I cranked it again and it fired right over!! I then used it for 5 hours straight with no issues. I guess that solenoid was stuck open/closed and it just needed to be disassembled..???? Thanks for all your help and input guys</p></blockquote><p></p>