Reply to thread

Message: <blockquote data-quote="Robanybody" data-source="post: 137898" data-attributes="member: 24688">There is a procedure in the manual for that.  I have winched machines onto trailers by removing the traction lock solenoid and then opening the chain case and pulling out the lock bar. You can't go very fast but you can tow the unit. Memory tells me less than 3 miles per hour.Just go slow and don't get under the load. You probably don't need to be told , but always put the back end of the loader towards the front of the trailer. They tend to be ass heavy, so unless you have a heavy attachment hooked up, they can roll over backwards on inclines.Good luck.</blockquote>