Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
more creep
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Fishfiles" data-source="post: 10194" data-attributes="member: 782"><p>Bluffcam , I'd would almost bet that your machine is a high flow machine as the units I seen with servo assist were , one of the first of it's kind , you made me remember an old guy thats gone away now that had one , it is still sitting in a lot here and was flooded over the roof in Katrina ---------the servo cylinders I doubt are your problem , if a remember right there is a plate on the side of the pump , this plate is just like the pintle plate that sits on top of the newer machines , there should be some 9/16 headed bolts holding blocks under the plate , the adjustment is made there , as stated get the machine jacked and blocked and I think you can barely loose the bolts and take a hammer and tap the heads one way or the other to take up the slack between the block and the steering pintle while you pull the level in the direction you need to stop the creep till you get it right , seems I remember that every action has an opposite reaction and the servos really throw things off -------good luck</p></blockquote><p></p>
[QUOTE="Fishfiles, post: 10194, member: 782"] Bluffcam , I'd would almost bet that your machine is a high flow machine as the units I seen with servo assist were , one of the first of it's kind , you made me remember an old guy thats gone away now that had one , it is still sitting in a lot here and was flooded over the roof in Katrina ---------the servo cylinders I doubt are your problem , if a remember right there is a plate on the side of the pump , this plate is just like the pintle plate that sits on top of the newer machines , there should be some 9/16 headed bolts holding blocks under the plate , the adjustment is made there , as stated get the machine jacked and blocked and I think you can barely loose the bolts and take a hammer and tap the heads one way or the other to take up the slack between the block and the steering pintle while you pull the level in the direction you need to stop the creep till you get it right , seems I remember that every action has an opposite reaction and the servos really throw things off -------good luck [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
more creep
Top