Mid and pressure washer

[Fabcor]

Hey folks, On the weekend I got my bobcat 130 swamped in deep mud. After a lot of back and forth motions trying to get out had to surrender and be taken out with backhoe. Later that evening began to pressure wash the **** out of the machine as there was black mud near to the windows, which means a lot under the cab. I pressure washed all over repeatedly to get the mud out. I jumped in it today to do some work and it is not right. When going back or forth very sluggish, but as I move it gradually picks up in speed, but very delayed. When loading and backing up at same time hardly enuf power, then sounds like a belt squealing. I’m not sure what I did, but isn’t good. If anyone has experience this or have heard of such thing.l, ant info would be greatly appreciated. Thanks

 

[Bswwood]

Drive belt. Remove cover between battery and bell housing and you will see the drive belt. You might have to clean that area and tension the belt.