Reply to thread

Message: <blockquote data-quote="HanSolo" data-source="post: 63041" data-attributes="member: 7905">I got it all back together last night. Pulling the new harness through and getting the replacement grommet back in place was the most troublesome. I shouldn't have put the terminals on the panel end of the harness because it just made it harder to pull through. Another note - the bus bar is hot so you want to insulate that with some electrical tape due to close proximedity to the metal encloser. I only took one photo due to time. I also replaced the ground wire from the alternator to voltage regulator mount point. In fact, that may have been the spark generator from the beginning! Next step will be to replace the other end of the harness from the multi-connector to coil, starter, etc.<a href="https://www.skidsteerforum.com/skid2/javascript:void(0);" target="_blank"><img src="http://i1336.photobucket.com/albums/o644/trscca12re/20130207_170857_zps7b324adf.jpg?t=1360337240" alt="20130207_170857_zps7b324adf.jpg " class="fr-fic fr-dii fr-draggable " style="" /></a></blockquote>