Reply to thread

Message: <blockquote data-quote="rjardo" data-source="post: 86474" data-attributes="member: 9710"><p>Hey all, my 610 has a small pesky leak in the right tilt cylinder.. I'd be all over pulling it and dropping in a seal kit, but both tilt cylinders have visibly bent rods, and of course some good dings in the shafts.. any decent replacements out there, or should i just reseal the heads and rotate the rods 180 and keep digging? i'm betting the rods can't be reconditioned if they are bent..</p></blockquote><p></p>