Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
lx865 start problem
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Mike10" data-source="post: 104290" data-attributes="member: 5461"><p>If you are talking about the resistor in the engine compartment fuse panel, the something is wired wrong. Power comes from the ACC terminal of the key switch and goes to one terminal of the resistor. On that terminal is also wires which go to the various small relays in that compartment, depending on equipment, but not the start relay......The other terminal on the resistor goes to the alternator. There should be 50ohm resistance in the resistor............With the KEY OFF, sit in the seat while watching the instrument panel. The panel should light up and go through a self test. After the self test there should be two lings flashing, park and seat belt. Fasten the seat belt and the seat belt light should go out. If all this checks out then the safety circuit should be working. If the foot pedal are free and not locked with the key off, or the seat belt off, then someone has bypassed the safety circuit and made you loader dangerous.</p></blockquote><p></p>
[QUOTE="Mike10, post: 104290, member: 5461"] If you are talking about the resistor in the engine compartment fuse panel, the something is wired wrong. Power comes from the ACC terminal of the key switch and goes to one terminal of the resistor. On that terminal is also wires which go to the various small relays in that compartment, depending on equipment, but not the start relay......The other terminal on the resistor goes to the alternator. There should be 50ohm resistance in the resistor............With the KEY OFF, sit in the seat while watching the instrument panel. The panel should light up and go through a self test. After the self test there should be two lings flashing, park and seat belt. Fasten the seat belt and the seat belt light should go out. If all this checks out then the safety circuit should be working. If the foot pedal are free and not locked with the key off, or the seat belt off, then someone has bypassed the safety circuit and made you loader dangerous. [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
lx865 start problem
Top