Reply to thread

Message: <blockquote data-quote="Shanmar" data-source="post: 142233" data-attributes="member: 21969">If it's in-out it may be just the snap ring broke and you may need some new/additional shims (items 22, 24, or 25). The snap ring (item 23) takes a pretty good set of pliers to handle it. You can get those NH part numbers here:[URL unfurl="true"]https://www.messicks.com/catalogs/new-holland/lx865-skid-steer-loader-11-94-09-99/no-d-no-description/06b01-final-drive[/URL]If you want to do the bearings and seals, here are the numbers for items 20, 21, and 19. If you hunt the internet you'll find them cheaper (I used to get the bearings from Autoplicity).  The outer seal 27 and wear ring 17 is NH specific numbers. Either get them from NH or google the numbers and you'll find other, cheaper sources.[ATTACH=full]8704[/ATTACH]This is using the normal seal. I didn't find the heavy duty seal to be worth the extra cost/effort for me. It replaces the outer seal and wear ring and you pack the outer wheel bearing with wheel bearing grease and no longer use the grease zerk.</blockquote>